Free Estimate

Get Your Free Quote

No pressure, no obligation. Tell us about your project and we’ll be in touch fast.

Up to 5 photos. A wide shot and a close-up help us quote faster.

Free and no obligation. We typically reply within one business day.

Foggy Window Repair

Fog Between The Panes Means The Seal Failed

You wipe the inside. You wipe the outside. The haze is still there. When the fog sits between the two panes of glass, the edge seal on that insulated unit has failed, and moist outdoor air is getting into a space that was built to stay dry.

The good news is that the window around it is often fine. When the sash and frame are sound, we replace just the insulated glass unit, sometimes called the IGU or the sealed unit, and the window goes back to looking and working the way it was built to.

Superior Glass has handled foggy window repair and window seal replacement for Twin Ports homes for decades. We measure the old unit, build or order the replacement to match, and set it in your sash.

  • New sealed unit, existing sash and frame
  • Matched overall thickness and size
  • Low-E and gas fill options
  • Tempered units where code requires them
  • An honest call on repair vs. replace
Get A Free Estimate
Foggy Window Repair in Superior & Duluth
Anatomy Of A Sealed Unit

What’s Inside An Insulated Glass Unit

Knowing the parts makes it clear why fog shows up and why wiping never fixes it.

Get A Free Estimate
Insulated glass unit components
PanesTwo or three lites of glass, annealed or tempered
SpacerA frame around the edge that holds the panes apart
DesiccantDrying material inside the spacer that soaks up trapped moisture
Edge sealsA primary vapor seal plus a secondary structural seal
Gas fillArgon or similar gas in many units, slower to move heat than air
CoatingLow-E on one pane surface in most modern units
The Details

Why Seals Fail And How We Fix Them

Why It Happens

Every day the air in a sealed unit expands and contracts with the temperature. Northland winters push that cycle hard, and over years it wears on the edge seals. Once a seal lets go, damp air moves in, the desiccant fills up, and moisture condenses on the inside faces of the glass.

  • Years of freeze, thaw, and sun on the edge seals
  • Water sitting in the glazing pocket because drainage is blocked
  • Harsh solvents or pressure washing at the glass edge
  • Age: every seal has a service life
Why It Happens

Why It’s More Than Looks

Fog is the visible part. Behind it, the gas fill has leaked away, and the unit no longer insulates the way it was built to. Left long enough, minerals from the moisture can stain or etch the inside surfaces, and that won’t clean off.

Some services drill the glass and dry it out. That can clear the view, but it doesn’t restore the gas fill or the factory seal. A new unit does.

Why It's More Than Looks

How A Glass-Only Swap Works

We measure the unit’s width, height, and overall thickness, note the glass type and any grids, and check the sash for rot. The new unit is built to match. On install day the stops come off, the old unit comes out, the new one goes in on setting blocks, and the stops and seals go back on.

Setting blocks matter more than they look. They hold the unit up off the bottom of the sash so the edge seal isn’t sitting in water, which is one of the reasons the old one failed in the first place.

How A Glass-Only Swap Works

When A New Window Makes More Sense

If the sash is rotted, the frame leaks air around the outside, the hardware is worn out, or most of the house is fogging at once, new glass in an old window can be throwing good money after bad. We’ll say so, and point you to window replacement or energy-efficient windows.

When A New Window Makes More Sense
Side By Side

New Sealed Unit Or Whole New Window?

Both clear the fog. They solve different problems. We confirm which fits your window at the on-site visit.

New sealed unitNew window
FixesFog, lost gas fill, broken glassFog plus rot, air leaks, and worn hardware
What staysSash, frame, trim, and interior finishOnly the rough opening
Energy performanceBack to the unit’s design, can add Low-EWhole new glass, frame, and seal system
DisruptionOne opening at a time, trim untouchedRemoval, install, and trim work
Best whenSash and frame are soundThe window itself is failing
Why Replace The Unit

What A New Sealed Unit Gets You

A Clear View Again

No haze, no water spots, no wondering whether the glass is dirty.

Insulation Restored

A fresh seal and new gas fill bring the unit back to its design performance.

Keep Your Windows

Your sash, trim, and paint stay exactly as they are.

Chance To Upgrade

Ask about Low-E glass in the new unit if the old one didn’t have it.

Warranty Check First

If your windows are still under a manufacturer’s glass warranty, we’ll help you check before you pay.

Honest Pricing

What Affects The Price

Every foggy window repair is priced after we measure. These are the things that move it.

01

Unit Size

Larger units cost more to build and can take two people to set.

02

Pane Count

Double- or triple-pane, matched to your sash’s pocket depth.

03

Glass Options

Low-E coating, gas fill, obscure glass, or tempered glass where code requires it.

04

Grids And Shapes

Grids between the glass, arches, and odd shapes add build time.

05

Number Of Units

Several units measured and installed on one trip is more efficient.

06

Sash Condition

Stops, glazing beads, or sash wood that need attention while the glass is out.

How It Works

How A Superior Glass Job Runs

Step 01

Measure On Site

Free consultation at your home or business. We measure every opening ourselves.

Step 02

Template The Opening

Walls are rarely square. We template so the glass fits the room you actually have.

Step 03

Cut And Fabricate

Glass is cut, edged, and prepared to your template before install day.

Step 04

Install

Floors protected, glass set, hardware tuned, and the site cleaned up.

Step 05

Walkthrough

We check every door, seal, and edge with you, then show you how to care for it.

Real Work

Recent Window Work

Storefront-style office glazing, clear anodized
Commercial interiorsStorefront-style office glazing, clear anodized
Black interior window wall into a private office
Commercial interiorsBlack interior window wall into a private office
Black aluminum entry vestibule
Commercial interiorsBlack aluminum entry vestibule
Glass-walled room inside a cafe
Commercial interiorsGlass-walled room inside a cafe

Every photo here is a real Superior Glass job, from the company’s own project posts.

Questions

Frequently Asked Questions

Not always. Condensation on the room-side surface is humidity meeting cold glass, and it wipes off. Fog you can’t wipe from either side is between the panes, and that is a failed seal. Our window condensation guide explains the difference.

Not properly. The moisture is sealed inside with the minerals it carries. Drilling and drying can clear the view for a while, but it leaves the unit unsealed and without its gas fill. A new unit is the permanent fix.

Yes. Once the seal fails, the insulating gas escapes and damp air replaces it, so the unit loses much of its insulating value. The U.S. Department of Energy’s Energy Saver guide also points to improving existing windows, such as adding low-e storm windows, as an alternative to full replacement.

We match size, overall thickness, and grid layout. Glass color and coatings can look slightly different from decades-old units side by side. We’ll talk through that before we order.

Possibly. Many window makers warrant their insulated glass against seal failure for a set period. Look for a label or etching on the glass or in the frame. We’ll help you check before you pay for a repair.

In the U.S., insulated glass unit durability is evaluated under ASTM E2190, which tests how well the seal holds up to heat, humidity, and UV exposure. It’s one of the details worth asking about on any replacement unit.

Only if the window itself is failing. Read our guide to foggy windows and failed seals, or ask us to look. We’ll tell you straight which fix makes sense.

Get Started Today

Clear Up Those Foggy Windows

Call (715) 685-0500 or send the form. We’ll measure, confirm whether a new sealed unit fits your window, and put the price in writing.