Free Estimate

Get Your Free Quote

No pressure, no obligation. Tell us about your project and we’ll be in touch fast.

Up to 5 photos. A wide shot and a close-up help us quote faster.

Free and no obligation. We typically reply within one business day.

Glass Repair

One Shop For Whatever Glass Broke

A baseball through the dining room window. A patio door that fogged up two winters ago. A shower door with a chipped corner, a cracked table top, a storefront lite that caught a rock off a plow. Glass breaks in a lot of ways, and most of the time the frame around it is fine.

Superior Glass has been fixing glass in the Twin Ports since 1933. We look at what broke, work out what kind of glass belongs in that opening, and replace only the part that failed when that is the honest answer. When it isn’t, we say so and show you why.

Glass repair in Duluth and Superior starts the same way for everyone: call (715) 685-0500 or use the form on this page. Tell us what broke and roughly how big it is, and we’ll tell you what we need to see.

  • Broken and cracked window panes
  • Foggy, failed insulated glass units
  • Entry, patio, and storm door glass
  • Shower doors and panels
  • Table tops, shelves, and storefront lites
Get A Free Estimate
Glass Repair in Duluth, MN & Superior, WI
Know Your Glass

What Goes Back In The Opening

Most of a good repair is getting the glass type right. These are the options we are choosing between when we look at your opening.

Get A Free Estimate
Glass types used in repair work
AnnealedStandard float glass. Breaks into large, sharp pieces
TemperedHeat-treated safety glass. Breaks into small pieces and cannot be cut after tempering
LaminatedTwo or more lites joined by a plastic interlayer. Cracks but stays in the frame
Insulated unitsDouble- or triple-pane sealed units, built to your sash’s size and thickness
Safety glazingRequired in hazardous locations such as doors and tub or shower walls (IRC R308.4 in Minnesota; the Uniform Dwelling Code in Wisconsin)
MeasuringTaken from the actual opening before anything is ordered or cut
What We Fix

Glass Repair, Opening By Opening

Broken And Cracked Window Panes

Single-pane glass in an older wood sash, a storm window, or a basement window can usually be reglazed. The broken glass comes out, the rabbet gets cleaned, and new glass is set, secured, and sealed. In most newer windows the pane is really a sealed insulated unit, and the repair is a new unit built to the same dimensions and overall thickness.

Either way, the frame stays put. For sashes that stick, balances that quit, and worn hardware, see window repair.

Broken And Cracked Window Panes

Foggy Glass Between The Panes

Haze you can’t wipe off from either side means the seal on an insulated unit has failed and moist air got in. The usual fix is a new sealed unit in your existing sash, as long as the frame is sound. Our foggy window repair page walks through how that works and when a whole new window makes more sense.

Foggy Glass Between The Panes

Door Glass: Entry, Patio, And Storm

Glass in and beside doors is a hazardous location under the building code, so the replacement has to be safety glazing, usually tempered. Sliding patio door panels are typically large tempered insulated units. Decorative glass in an entry door is often a sealed insert that can be replaced on its own.

If the door itself is worn out, look at entry doors or patio and sliding doors instead.

Door Glass: Entry, Patio, And Storm

Shower, Table, And Specialty Glass

Shower doors are tempered, which means they can’t be trimmed, drilled, or patched once they are made. A chipped or broken panel gets remade to measure. Table tops, shelves, and cabinet glass are cut and edged to size in the shop.

See shower door repair and custom glass for the details, and commercial glass repair for storefronts and offices.

Shower, Table, And Specialty Glass
How We Work

Repair Done The Way We’d Want It Done

Fix The Part That Failed

When the frame, sash, or door is sound, we replace the glass, not the whole unit.

The Right Glass For The Spot

Tempered or laminated where the code calls for safety glazing, matched thickness everywhere else.

Measured, Not Guessed

Old houses settle and openings drift out of square. We measure the real opening before we order.

A Straight Answer

If a repair would mean throwing money at a failing window, we tell you plainly and lay out the options.

Clean Job Site

Broken glass is a hazard. We protect your floors and clean up after ourselves, shards included.

Local Since 1933

A Superior shop with roots in Kempinsky Glass & Paint (1925), still working out of 7500 Tower Ave.

Side By Side

Annealed, Tempered, Or Laminated?

Which glass goes back in depends on where the opening is. These are general properties, not a quote. We confirm the right glass for your opening when we see it.

AnnealedTemperedLaminated
How it breaksLarge, sharp shardsSmall, blunt piecesCracks but holds to the interlayer
StrengthThe baselineSeveral times stronger than annealedDepends on the glass inside it
Cut after it’s made?YesNo. Cut, edged, and drilled firstYes, with care
Counts as safety glazing?NoYesYes, when rated
Typical spotsOrdinary windows away from doors, tubs, and floorsDoors, showers, low large windows, table topsOverhead glass, security, sound control
Honest Pricing

What Affects The Price

Every repair is priced after we see it. These are the things that move the number.

01

Glass Type

Annealed, tempered, laminated, or insulated. Safety glass takes more steps to make than plain glass.

02

Size And Thickness

Bigger, thicker glass costs more and sometimes takes more hands to set safely.

03

Sealed Unit Build

Double or triple pane, Low-E coating, gas fill, and spacer type all carry into a replacement unit.

04

Shape And Edgework

Rectangles are simplest. Curves, notches, holes, and polished edges add shop time.

05

Access

A ground-floor sash is a different job from a second-story window or a storefront lite over a sidewalk.

06

Frame Condition

Rotted stops, failed glazing, or a damaged sash can add work beyond the glass itself.

How It Works

How A Superior Glass Job Runs

Step 01

Measure On Site

Free consultation at your home or business. We measure every opening ourselves.

Step 02

Template The Opening

Walls are rarely square. We template so the glass fits the room you actually have.

Step 03

Cut And Fabricate

Glass is cut, edged, and prepared to your template before install day.

Step 04

Install

Floors protected, glass set, hardware tuned, and the site cleaned up.

Step 05

Walkthrough

We check every door, seal, and edge with you, then show you how to care for it.

Real Work

Recent Work By Our Crew

Storefront-style office glazing, clear anodized
Commercial interiorsStorefront-style office glazing, clear anodized
Black interior window wall into a private office
Commercial interiorsBlack interior window wall into a private office
Black aluminum entry vestibule
Commercial interiorsBlack aluminum entry vestibule
Glass-walled room inside a cafe
Commercial interiorsGlass-walled room inside a cafe

Every photo here is a real Superior Glass job, from the company’s own project posts.

Questions

Frequently Asked Questions

Usually, yes. If the frame and sash are sound, we can reglaze a single-pane sash or build a new sealed unit to fit the one you have. If the frame is the real problem, we will tell you that before you spend anything.

Yes. We board up and secure a broken window or door, then measure and fabricate the permanent glass. Call (715) 685-0500.

Keep people and pets away from it, and don’t pull loose shards out of the frame by hand. Clear packing tape over a crack and plastic sheeting over a broken opening will slow the cold. Broken tempered glass can let go all at once, so leave it alone and call us to talk through the next step.

Building codes require safety glazing in hazardous locations. In the International Residential Code (Section R308.4), which Minnesota adopts, that includes glass in doors, glass within 24 inches of a door edge with its bottom under 60 inches off the floor, glass in tub and shower walls with its bottom edge under 60 inches above the standing surface, large windows close to the floor, and glass near stairs and landings. Wisconsin homes, including Superior, fall under the state’s Uniform Dwelling Code, which draws some of those lines differently, so we confirm the rule for your address. Safety glazing is tested to CPSC 16 CFR 1201 or ANSI Z97.1.

In most cases. The fix is a new insulated glass unit set into your existing sash. See foggy window repair for when that works and when it doesn’t.

Yes. Superior Glass works on residential and commercial glass. Storefront, office, and entrance glass are covered on our commercial glass repair page.

Small items like a storm sash, a cabinet door, or a table top can often come to our shop at 7500 Tower Ave in Superior. Our Google listing shows Monday through Friday, 7 to 4. Call (715) 685-0500 first so we can tell you whether we need to see the opening instead.

Yes. Duluth is a short drive across the bay from our shop. See glass repair in Duluth for local details, including notes for older and historic homes.

Get Started Today

Something Broke? Start Here.

Call (715) 685-0500 or send the form. Tell us what broke and where, and we’ll put the price in writing before any work starts.