Free Estimate

Get Your Free Quote

No pressure, no obligation. Tell us about your project and we’ll be in touch fast.

Up to 5 photos. A wide shot and a close-up help us quote faster.

Free and no obligation. We typically reply within one business day.

Storefronts

The Front Of Your Business, Built To Work Hard

Your storefront gets opened thousands of times a season, leaned on, bumped by carts, and hit with wind coming straight off Lake Superior. It is also the first thing a customer judges before they ever reach the counter. Good storefront glass has to do both jobs: look sharp from the sidewalk and hold up to Northland winters.

Superior Glass plans, fabricates, and installs aluminum storefront systems and entrances for businesses across Superior, Duluth, and the surrounding towns. We measure the opening ourselves, build the frame and glass to fit, and set the doors and hardware so they swing, latch, and seal the way they should.

Whether you are fitting out a new tenant space, replacing a tired 1980s front on a retail block, or adding an entrance to an office, you get a straight conversation about options and a written price before any work starts.

  • Aluminum storefront framing and entrances
  • Thermally broken options for exterior openings
  • Tempered and laminated safety glass
  • Clear anodized, black, and bronze finishes
  • Door hardware set and adjusted at install
Get A Free Estimate
Storefront Glass in Superior, WI & Duluth, MN
Spec Sheet

Storefront Systems, By The Numbers

The pieces we walk through at every storefront consultation, so you know what is going into your opening.

Get A Free Estimate
Storefront at a glance
FramingExtruded aluminum storefront, set within the opening
Thermal breakAvailable on exterior systems to cut heat loss through the frame
GlassInsulated units with Low-E options on exterior walls
Safety glassTempered or laminated wherever the building code calls for it
FinishesClear anodized, black, bronze, and other colors by system
ScopePlanning, fabrication, and installation
The Details

What Goes Into A Storefront That Lasts

Thermally Broken Framing For Northland Winters

Aluminum is strong and stable, but it moves heat quickly. On an older storefront you can see it: frost on the inside of the frame on a cold morning and water pooling on the sill as it melts.

A thermally broken frame puts a low-conductivity strip between the outside and inside halves of the extrusion, so the cold stays out on the sidewalk side. Paired with insulated, Low-E glass, it keeps the entry zone more comfortable for your staff and cuts down on condensation.

Thermally Broken Framing For Northland Winters

Safety Glass Where People Push And Lean

Glass in doors, glass next to doors, and large lites close to the floor are hazardous locations under the building code, and they need safety glazing. Tempered glass is heat treated so it is several times stronger than ordinary annealed glass and breaks into small, blunt pieces. Laminated glass bonds layers to a plastic interlayer that holds the pieces in place if it cracks, which also slows down a break-in.

Both types are tested to the federal safety glazing standard (CPSC 16 CFR 1201) and ANSI Z97.1. We specify which goes where, lite by lite.

Safety Glass Where People Push And Lean

Entrances That Work For Everyone

If your entrance is part of an accessible route, the 2010 ADA Standards set the ground rules. A door opening needs at least 32 inches of clear width, measured with the door open 90 degrees (404.2.3). Thresholds can be no more than 1/2 inch high (404.2.5), and any change in level over 1/4 inch has to be beveled (303). Handles have to work with one hand, without tight grasping or twisting (404.2.7).

Heavy doors and strong wind are a real problem at a lakeside entrance. If a manual door is hard to open, an automatic or power-assist operator is often the cleaner answer.

Entrances That Work For Everyone

Finishes And Hardware

Clear anodized aluminum is the classic, low-maintenance choice. Black and bronze suit brick blocks and newer builds alike. We bring samples so you can see the finish against your building.

Hardware is where a storefront earns its keep: pivots or continuous hinges, closers, push and pull handles, and exit devices where the occupancy calls for them. We set and adjust all of it at install.

Finishes And Hardware
Side By Side

Tempered Or Laminated Storefront Glass?

General guidance, not a spec. The code, the location of each lite, and your security needs decide the final call.

TemperedLaminated
How it breaksCrumbles into small, blunt piecesCracks but stays in the frame
After a breakThe opening is open until replacedThe lite usually stays in place until replaced
SecurityStrong, but gives way once brokenSlows forced entry
SoundStandardInterlayer dampens street noise
Common spotsDoors, sidelites, low glassStreet-facing lites, security concerns
Why Businesses Call Us

Storefront Work Done The Right Way

Measured By Our Crew

The people who measure the opening are the people who build and install it.

Safety Glass By Code

Tempered or laminated in every hazardous location, specified lite by lite.

Insulated Glass

Low-E insulated units and thermally broken framing for exterior openings.

Hardware Set Right

Closers, hinges, and handles adjusted so the door swings and latches cleanly.

Your Hours In Mind

We ask about your hours up front and tell you plainly what the work will disrupt.

Clean Job Site

Part of our Promise Plan. We clean up before we leave, every day.

Honest Pricing

What Moves A Storefront Price

Every quote is written after we measure. These are the choices that move it.

01

Opening size and count

More and larger lites mean more framing, more glass, and more handling.

02

Framing system

Thermally broken exterior framing costs more than an interior or non-thermal system.

03

Glass makeup

Insulated, laminated, Low-E, or tinted glass each change the cost of every lite.

04

Entrance doors

Stile width, closers, exit devices, and automatic operators all add up.

05

Finish

Clear anodized is the baseline; darker anodized and painted finishes vary by system.

06

Site conditions

Removing an old front, access at the street, and after-hours work all affect labor.

Deeper Reading

Storefront Questions Worth Asking

If the frame is straight, drains properly, and the doors still hang true, new glass and hardware can give an older storefront years more service. If the frame is bent, the finish is failing, or you see frost and water on the inside every winter, a new thermally broken system is usually the better spend.

We will look at it with you and say which side of that line your storefront is on.

On a new lease, the storefront often has to line up with signage, lighting, the landlord’s standards, and an accessible entrance. Bring the lease drawings or your architect’s plans if you have them, and we will plan the glass and entrance around them. Our storefront glass checklist covers what to have ready.

How It Works

How A Superior Glass Job Runs

Step 01

Measure On Site

Free consultation at your home or business. We measure every opening ourselves.

Step 02

Template The Opening

Walls are rarely square. We template so the glass fits the room you actually have.

Step 03

Cut And Fabricate

Glass is cut, edged, and prepared to your template before install day.

Step 04

Install

Floors protected, glass set, hardware tuned, and the site cleaned up.

Step 05

Walkthrough

We check every door, seal, and edge with you, then show you how to care for it.

Real Work

Recent Storefront Jobs

Storefront-style office glazing, clear anodized
Commercial interiorsStorefront-style office glazing, clear anodized
Black interior window wall into a private office
Commercial interiorsBlack interior window wall into a private office
Black aluminum entry vestibule
Commercial interiorsBlack aluminum entry vestibule
Glass-walled room inside a cafe
Commercial interiorsGlass-walled room inside a cafe

Every photo here is a real Superior Glass job, from the company’s own project posts.

Questions

Frequently Asked Questions

Often, yes. If the frame is sound, we can replace broken or fogged lites and adjust the door hardware. See commercial glass repair for how that works.

Storefront is usually a single story set within an opening, with the entrance built into the same system. Curtain wall hangs off the building structure and can span several floors. Our curtain wall page covers it in detail.

Glass in doors is a hazardous location under the International Building Code (Section 2406), so it needs safety glazing, typically tempered or laminated. We specify it for every door we build.

A thermally broken frame with insulated, Low-E glass loses far less heat than an older non-thermal frame with single glazing. How much it saves depends on the size of the front and how your space is heated.

Yes. We can build from drawings and specs, or plan the storefront with you directly if there is no designer on the project.

We offer 0% interest and up to 365 days same-as-cash on approved credit. Ask us whether it fits your project.

Yes. Automatic sliding and swinging entrances can be built into a storefront, and we install and service them with an AAADM certified crew. See automatic doors.

Get Started Today

Ready To Talk About Your Storefront?

Tell us about the space or send drawings. We will walk the opening, answer your questions, and put the price in writing. More options on our commercial glass page.