Condensation on Windows, Explained

Problem Guide · 6 min read

Condensation In One Paragraph

Air holds water vapor. The warmer the air, the more it can hold. When air touches a surface colder than its dew point, some of that vapor turns back into liquid water. A cold glass of lemonade sweats in July for the same reason your windows sweat in January. The only question is which surface is cold, and which air is wet.

With windows, that plays out in four different places. Each one means something different, and only two of them are worth worrying about.

The Four Places You’ll See It

Where the water sitsWhat it usually meansWhat to do
Inside face of the glass (room side)Indoor humidity is high for how cold the glass isLower humidity and ventilate. If one window is always worse, check that window.
Outside face of the glassThe glass is keeping your heat in, so the outer pane stays coolNothing. It clears as the sun and air warm the glass.
Between the panes of a sealed unitThe edge seal has failed and moist air has gotten insideReplace the sealed glass unit, or the window if the frame is also failing.
Between a window and its storm windowMoist room air is leaking past the main sashTighten the main window. Keep the storm’s weep openings clear.

On The Inside: A Humidity Signal

Water on the room side of the glass means the indoor air is carrying more moisture than that window can handle at that temperature. The usual sources are showers, cooking, humidifiers, laundry drying indoors, and a house that’s been buttoned up tight for the winter. University of Minnesota Extension lists condensation on windows in winter as a sign of excess moisture in a home.

Start with ventilation: run bath fans and the range hood, and make sure they vent outdoors. Turn the humidifier down as the weather gets colder. Open blinds during the day so room air can reach the glass. When it turns bitter, the same moisture shows up as frost, which we cover in ice on the inside of windows.

If one window sweats while the others stay dry, that window is running colder than the rest. Air leaks, a failed seal, or single-pane glass are the usual suspects.

On The Outside: Usually Good News

Dew on the outside of the glass surprises people, especially right after new windows go in. It’s a sign the glass is working. An insulated unit with a Low-E coating keeps room heat from reaching the outer pane, so that pane stays close to the outdoor temperature. On a clear, still night it can even drop below the air temperature, the same way frost forms on a car windshield or the lawn.

When the outer pane is cooler than the dew point of the morning air, water beads on it. You’ll see it most on late summer and fall mornings near the lake. It burns off as the sun comes up. There’s nothing to fix.

Between The Panes: A Failed Seal

This is the one that doesn’t wipe off. A double or triple-pane window is a sealed unit: two or three lites of glass held apart by a spacer, sealed around the edge, with a drying agent (desiccant) inside the spacer and often argon gas in the gap.

When the edge seal breaks down from years of heating and cooling, sun, and water sitting against the bottom of the unit, humid air works its way in. The desiccant soaks up what it can, then it’s full. After that you get fog on warm afternoons, and eventually a white mineral haze on the inside surfaces that no cleaning can reach.

A fogged unit has also lost the gas that gave it much of its insulating value. The lasting fix is a new sealed unit in the existing sash, which is what our foggy window repair covers. If the frame is rotting or the sash no longer operates, window replacement is the better spend.

Between The Window And The Storm

Older homes with storm windows can show condensation or frost in the gap between the main window and the storm. That’s room air leaking past the main sash and meeting the cold storm glass. Weatherstrip the main window and make sure its lock pulls the sash tight. The storm should be the looser of the two, and the small weep openings along the bottom of a combination storm should stay open.

When To Call

  • Fog or haze between the panes that comes and goes, or won’t wipe off
  • One window that always sweats or frosts while the others stay clear
  • Water staining, peeling paint, or soft wood on sills and stools
  • Moving air you can feel around a closed sash
  • Several units fogging at once, which usually means a round of seals reaching the end of their life
Questions

Frequently Asked Questions

No. It usually means the opposite. Well-insulated glass keeps the outer pane cool, so morning dew forms on it. It clears on its own as the day warms up.

Not necessarily. If the frame and sash are in good shape, the sealed glass unit can often be replaced by itself. If the frames are rotting or the windows won’t open and lock, replacement makes more sense.

Age, sun, and constant expansion and contraction as the glass heats and cools. Water that sits against the bottom edge of the unit speeds it up. Every seal eventually wears out. The only question is how soon.

Long heating seasons. NOAA’s 1991-2020 normals count about 8,822 heating degree days a year at the Superior weather station and 9,115 at the Duluth airport, with average January lows of 5.8°F and 2.4°F. That’s a lot of months with warm, moist air on one side of the glass and cold on the other.

It isn’t dangerous. You lose the view and some insulating value, and the haze tends to get worse. Plenty of people replace fogged units in batches when it suits their budget.

Lower as it gets colder. Minnesota’s Center for Energy and Environment recommends under 30% when it’s 0 to 10°F outside and under 25% from -10 to 0°F. NDSU Extension notes that going below 30% can dry out skin, so adjust with the weather.

Get Started Today

Foggy Glass Or A Window That Always Sweats?

Send us a photo or have us out to look. We’ll tell you whether it’s the glass, the seal, or the house, and put any price in writing.