Energy-Efficient Window Glass Explained

Energy Efficiency · 7 min read

Glass is most of a window, and most of what separates a comfortable room from a cold one in January. The good news is that you do not have to trust anyone’s adjectives. Every rated window carries numbers that tell you how it performs.

Here is what those numbers mean and how to read them for a house in the Twin Ports.

Start With the NFRC Label

The National Fenestration Rating Council (NFRC) rates whole windows, frame and glass together. Its label shows the same set of numbers on every product, so you can compare one brand to another fairly. Always compare ratings for the whole unit, not a glass-only figure.

RatingWhat it measuresWhich way is betterWhat it means up here
U-factorHeat escaping through the windowLowerThe main winter number
SHGCSolar heat coming inDependsSome solar gain helps in winter
Visible transmittanceDaylight coming throughHigherMore coatings and panes lower it a little
Air leakageAir passing through the unitLowerMatters in lake wind
Condensation resistanceResistance to moisture on the glassHigherHelpful in humid homes

U-Factor: The Winter Number

U-factor tells you how fast heat moves out through the window. NFRC ratings run from about 0.20 to 1.20, and lower is better. In a heating climate like ours, this is the number to watch first.

Three things drive it down: more panes, a Low-E coating, and an insulating gas between the panes. The frame material and the spacer at the edge of the glass matter too, which is why a whole-window rating is the honest comparison.

SHGC: Free Heat or Unwanted Heat

Solar Heat Gain Coefficient measures how much of the sun’s heat gets through, from 0 to 1. In a hot climate you want it low. In the north, a moderate SHGC lets a south-facing window collect some free heat on a clear winter day.

ENERGY STAR recognized this in its current criteria by setting a minimum SHGC for Northern zone windows, not just a maximum U-factor. A west-facing room that overheats on summer afternoons may still be a good spot for lower solar gain. It is fine to mix.

Low-E Coatings

Low-E, short for low-emissivity, is a microscopically thin metallic coating on one of the glass surfaces. It lets visible light through while reflecting heat. In winter it keeps room heat inside. Different coatings are tuned to let in more or less of the sun’s heat, which is how manufacturers adjust SHGC.

You cannot see the coating, and it does not need special care. It also cuts the ultraviolet light that fades floors and fabrics.

Gas Fill and Warm-Edge Spacers

The space between the panes is filled with argon, or sometimes krypton, instead of air. Both conduct heat more slowly than air. Argon is the everyday choice. Krypton performs well in the narrow gaps of some triple-pane units.

The spacer that holds the panes apart is where a lot of heat escapes. Warm-edge spacers use less conductive materials, which keeps the edge of the glass warmer and cuts down on condensation along the bottom of the pane.

Double or Triple Pane?

Triple-pane glass lowers U-factor further. It is also heavier, costs more, and lets through slightly less light and solar heat. It earns its place on north walls, large picture windows, and rooms right off the lake. For many houses, a good double-pane Low-E unit with argon is the sensible middle. You do not have to choose one for the whole house.

ENERGY STAR in the Northern Zone

ENERGY STAR splits the country into four climate zones, and the Twin Ports sit in the Northern zone. Under Version 7.0, in effect since October 2023, a Northern zone window qualifies with a U-factor of 0.22 or lower and an SHGC of at least 0.17. An equivalent-performance path allows a slightly higher U-factor when it is paired with a higher SHGC.

That label is a solid floor, not a ceiling. Two qualifying windows can still differ in air leakage and condensation resistance, so read the whole label.

Where We Come In

We install Marvin, H Window, Vector, and Hayfield windows, and we will walk you through the label on each unit we quote. See the glass options on our energy-efficient windows page, learn more about Marvin windows, or start a project on our window replacement page.

Questions

Frequently Asked Questions

NOAA’s 1991-2020 normals show about 8,800 heating degree days a year at the Superior station and about 9,100 at the Duluth airport, with average January lows of 5.8F and 2.4F. The airport sits higher and inland, so lakeside neighborhoods usually run a bit milder. Either way, a low U-factor pays off over a long heating season.

It helps a lot, because the room-side glass stays warmer. It cannot fix very high indoor humidity. Our post on window condensation covers the other half.

Sometimes. If the frame and sash are sound, a new sealed glass unit with Low-E and argon can often be fitted into the existing sash. It depends on the sash depth and design, which we check in person.

Tint mostly reduces glare and solar heat. Low-E does far more for winter heat loss, and it is nearly invisible. Compare the NFRC numbers rather than the color.

Programs change often, so check with your utility and the current federal rules before you buy. We can give you the NFRC ratings for each unit so you have what the paperwork asks for.

Get Started Today

Want Help Reading The Labels?

Send us your quote or tell us about your house. We will explain the numbers plainly and put our price in writing.